blog.zuthof.nl

  • Home
  • Blog
  • About

Homelab

VMware NSX
Homelab

Deploy NSX 4.x Edge nodes on unsupported vSphere

NSX 4.0 onwards only supports vSphere 7 and later. In my homelab I’m still running ESXi 6.7 which is joined to a vCenter 8 instance. It’s because the RAID controller in my host is unsupported in ESXi 7+ and no native drivers are available. Running an older ESXi version is Read more…

By Daniël Zuthof, 3 monthsJanuary 11, 2023 ago
Homelab

Update VMware Tools package on ESXi

In most cases VMware Tools are available as part of ESXi installation. When updating an ESXi host, the VMware Tools could be updated, but most of the time not to the latest version. In this post I’ll show you how ESXi hosts can updated to the latest available version, when Read more…

By Daniël Zuthof, 3 monthsJanuary 2, 2023 ago
Homelab

Manually updating ESXi Hosts

How to manual update you ESXi host with the latest VMware patches.

By Daniël Zuthof, 3 monthsJanuary 2, 2023 ago
Homelab

ESXi 8 on the Maxtang NUC

My latest homelab addition is the Maxtang NX6412 NUC which was given by VMware, together with Cohesity (many thanks both!) at VMware Explore to all vExperts who registered for the gift. After adding RAM and a SATA SSD, it was time it ran ESXi 8. The specs of this neat, Read more…

By Daniël Zuthof, 4 monthsDecember 12, 2022 ago
Homelab

Create ESXi 8 Customized ISO Installer

Once and a while ESXi needs to be installed on a device of which the drivers (NIC / Storage) are not built into the ISO installer (yet). In my case it’s needed for the vExpert homelab Maxtang NUC device. This device has a Realtek PCIe NIC’s not supported by ESXi Read more…

By Daniël Zuthof, 4 monthsDecember 7, 2022 ago
Cloud Foundation

Cloud Foundation: Update SDDC bring-up parameters

While troubleshooting of a failed SDDC Manager deploy task in Cloud Foundation 4.4 together with VMware support, the engineer showed a way to update the SDDC bring-up parameters. This can be very helpful because it can restart a failed SDDC deployment with updated parameters. This prevents redeploying the physical servers Read more…

By Daniël Zuthof, 1 yearMarch 28, 2022 ago
Cloud Foundation

Cloud Foundation: Deploy of SDDC Manager failed during bring-up

Recently I moved to the latest Cloud Foundation version (v4.4) in a lab environment that I often re-deploy. I noticed that during the Cloud Builder bring-up phase the deploy of the SDDC managed failed ever since, while using the same input parameters in the deployment parameters workbook. So it worked Read more…

By Daniël Zuthof, 1 yearMarch 16, 2022 ago
Homelab

Ubuntu gets DHCP address while static configured

One of my Raspberry Pi’s runs Ubuntu Server 20.04 (Focal) and has a static IP interface configuration using systemd. The Pi is configured in the same way as in the previous post on this topic, “Linux interface config with systemd“. The previous post describes how systemd can be configured for Read more…

By Daniël Zuthof, 1 yearOctober 26, 2021 ago
Homelab

IPv6 Series: Part 5 – IPv6 with NSX-T

In this IPv6 series I’d like to tell you about my “journey” to implement the protocol at home and in the lab. This part explains how IPv6 can be used with NSX-T in the datacenter. Expect the creation and / or configuration of T0 and T1 routers, Uplink configuration, Static Read more…

By Daniël Zuthof, 2 yearsJune 16, 2021 ago
IPSec config and phases overview
Homelab

IPv6 Series: Part 4 – IPSec VPN

In this IPv6 series I’d like to tell you about my “journey” to implement the protocol. I already had some knowledge of it, but not extensively. As a first step IPv6 is implemented at home. The plan is to work my way back from home to my lab in the Read more…

By Daniël Zuthof, 2 yearsMarch 15, 2021 ago

Posts navigation

1 2 Next
Categories
  • Azure
  • Certification
  • Cloud Director
  • Cloud Foundation
  • Electronics
  • Homelab
  • Linux
  • Microsoft
  • Networking
  • NSX
  • Office
  • PowerCLI
  • PowerShell
  • Security
  • Storage
  • Ubiquiti
  • vCloud Director
  • VMware
  • vSAN
  • vSphere
  • Windows
Tags
6RD avi caa certificate Certification cloud director DAD dhcp DHCPv6 dns EdgeRouter esxcli esxi Exam homelab IPv6 linux load balancer macOS Microsoft MLD NDP network nsx nsx-t Password pfs pfSense profile Review routing SLAAC ssl ssl labs tidbits tls Ubiquity vcap vcd vcloud vcloud director VMware VMware Tools vSAN vSphere
Recent Posts
  • Deploy NSX 4.x Edge nodes on unsupported vSphere
  • Update VMware Tools package on ESXi
  • Manually updating ESXi Hosts
  • ESXi 8 on the Maxtang NUC
  • Create ESXi 8 Customized ISO Installer
Post Archive
  • About
  • Blog
  • Home
  • Privacy Policy
Hestia | Developed by ThemeIsle